高速护坡模具的使用寿命平均为2年左右,为了更好的生产效率以及使用寿命模具需定期保养,如:每天使用完之后必须使用水清洗干净,防止水泥混凝土凝固而导致再次生产的高速护坡表面有瑕疵。冬季不用放入仓库时在墙面和门窗上刷上白色,避免阳光直射,不能同仓贮存腐蚀性较强的产物反正模具变黄。高速护坡模具具有韧性强,平整度高,不易变聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 形等优点,在使用模具过程中应注意防止塑料软化,为了防止模具变形通过外界力量进行改正,将放有水泥的模具互相挤在一起防止变形,或者增加塑料模具的壁厚,但是在阴凉处问题不是很大,夏季温度高增加脱模的次数,增加每日的生产量。我们只有在使用模具的过程中注意到这些问题,才能更好的保养模具,使模具的寿命更长。 高速护坡模具的生产过程主要包括:1.生产技术准备过程.包括模具产品的试验研究和设计,
The average service life of the high-speed slope protection mold is about 2 years. In order to improve the production efficiency and service life, the mold needs to be maintained regularly. For example, the mold must be cleaned with water after use every day to prevent defects on the surface of the high-speed slope protection produced again due to the solidification of cement concrete. When not put into the warehouse in winter, paint white on the walls, doors and windows to avoid direct sunlight. Products with strong corrosivity cannot be stored in the same warehouse. Anyway, the mold turns yellow. The high-speed slope protection mold has the advantages of strong toughness, high flatness and not easy to deform. In the process of using the mold, attention should be paid to prevent plastic softening. In order to prevent mold deformation and correct it through external forces, squeeze the molds with cement together to prevent deformation, or increase the wall thickness of the plastic mold, but the problem is not great in the shade. Due to the high temperature in summer, the number of demoulding increases, Increase daily production. Only when we pay attention to these problems in the process of using the mold can we better maintain the mold and prolong the service life of the mold. The production process of high-speed slope protection mold mainly includes: 1. Production technology preparation process, including experimental research and design of mold products,